E.K. Machine has multiple pallet, high speed Horizontal Machining Centers using 4 sided tombstones and quick change fixture plates to minimize set-up time. Multiple operations or parts can be run at the same time, with the machine continuing to work while the operator loads, unloads, and performs part inspections.

Our Horizontal Machining Centers can accommodate a part size up to 41 in. diameter and up to 51 in. in height with a 3,300 lb. table capacity. Our largest Vertical Machine Center has a work envelope of 50 in. deep, 150 in. wide, and 50 in. high with a 10,000 lb. table capacity.

Our production machines have automatic tool changers with capabilities up to 180 tool holders.

Available Sizes:

  • Horizontal Machining Centers: Up to 41 in. diameter and 51 in. height, with weight up to 3,300 lbs.
  • Vertical Machining Envelope:  Up to 50 in. depth, 140 in. width, 40 in. height, with weight up to 10,000 lbs.

We can mill face to a machine surface to 32 rms and an overall tolerance of .001 T.I.R. depending on stock and size.

We have qualified sources to finish, grind, heat treat, and plate to your requirements.

Note:  Although the newest HMC has a work envelope of 41 in. diameter and 51 in. height, the machine X and Y travels are only 41 in. and 35.43 in. respectively. Depending on the part, that may or may not be a problem, depending on the machining requirements.